The ABR800 20° Grid
The standard 10-inch ring reflector (supplied with both the ABR800 and the ZRM1 RingMaster) is designed to hold our 20º ringflash honeycomb grid for "Hollywood Style" lighting and for other low-key effects. The doughnut-shaped honeycomb grid will tighten the total beam spread of the reflector from 80º down to a more controllable 20º.
The standard ring reflector has recessed outer lip for the grid to snap into, having a banded center hole so that it may be used in the standard aim-through ringflash mode. When using the grid, the diffuser may be left in place or removed depending on your desire for diffused or non-diffused output.
Note: The ABRHG20 honeycomb grid cannot be used with standard Paul C. Buff Inc. flash units as the grid is doughnut-shaped with a pre-cut center hole. Similarly, our standard flash unit grids (HG10, HG20, HG30 and HG40) cannot be used with either the ABR800 or the ZRM1.
