|
|
|
 
|
HG10
|
$29.95
|
|
| HG20 |
$29.95 |
|
| HG30 |
$29.95 |
|
| HG40 |
$29.95 |
|
| HG4X |
$99.95 |
|
|
|
Honeycomb Grids
The Honeycomb Grids come in four angles of beam width: 10º, 20º, 30º and 40º. The Mainframe can be used for grid attachment, as the grids can recess directly into the frame, and may then be used with other LiteMod accessories. With the X-Series units, the Mainframe is not required as our honeycomb grids will snap directly into the outer lip of the 7AB/R 7-inch reflector as well.
the HG10° - 80° beam spread down to 10°
the HG20° - 80° beam spread down to 20°
the HG30° - 80° beam spread down to 30°
the HG40° - 80° beam spread down to 40°
|
HG10
10º Grid
|
HG20
20º Grid
|
HG30
30º Grid
|
HG40
40º Grid
|
| at 1 foot |
6 inches
|
12 inches
|
18 inches
|
24 inches
|
| at 5 feet |
12 inches
|
24 inches
|
36 inches
|
48 inches
|
| at 10 feet |
24 inches
(2 feet)
|
48 inches
(4 feet)
|
72 inches
(6 feet)
|
96 inches
(8 feet)
|
|
|
|
|
(click image to enlarge)
|
|
|
|
Note: The 7-inch reflector that is designed with the recessed outer lip has only been offered on the White Lightning X-Series units purchased since August of 2003, and on the UltraZAP Series Units purchased since February 2005. If you have an X-Series unit purchased before then, or if you have one of the previously offered White Lightning Ultra Series or ZAP Flash Units, the standard reflector that came with that unit did not have the modified outer lip for directly recessing the honeycomb grids. You will need to use the UMF Mainframe to hold the honeycomb grids. If you have one of the previously offered White Lightning WL 5,000 or WL 10,000 Flash Units, you can use the GS1 Grid Spot Attachment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
