The WLC
Foam-Lined Travel / Location Case
For Paul C.
Buff, Inc. Flash Units
Thank
you for purchasing the WLC Travel Case!
Please call us on our Toll Free Service Line, 1-800-443-5542, if you
should have any questions, or need any assistance. We’re here Monday through Friday, from 9:00am
until 5:00pm (Central Standard Time), ready to assist you.
The
WLC case is especially handy and lightweight, ideal for carrying your lights
and accessories. With removable pre-cut foam cubes, you can design your own layout
for up to three Paul C. Buff, Inc. flash units (including all White Lightning
and AlienBees models), with plenty of room left for accessories and
cables. The exterior shell is a tough,
impact-resistant HMW polyethylene, with a heavy-duty aluminum rim. For ease of handling, the case has a golf
grip handle, cast chrome key locks, and a full length piano hinge. The case has
a 3-piece foam interior with pre-cut cubed foam layers over a bottom cushion
and a convoluted foam lid. The case measures 28" wide x 20" tall x
9" deep, and weighs 17 pounds empty.
Please note that the WLC Travel Case is designed for around-town
location work, and is not recommended for airline travel.
You
may design your own layout with the pick-and-pluck foam cubes, pre-cut for your
convenience. To minimize any shifting
during travel, it is best to remove just enough cubes for your items to fit
snugly in the case, with at least one layer of cubes between each light and
accessory. There are two layers of cubes
(442 in each layer: 26 across and 17 down), each measuring 1” across the top,
and 1” deep. Feel free to explore and
use any combination of items and shapes in order to maximize space. To protect your flashtubes and modeling
lamps, you should always travel with the shipping cover in place. Should you have any safety concerns or
questions, please call us. Good Luck,
and enjoy your new case!